Customsized Safty Indicators For Lorry, Truck, Car Wheel Nut
Loose Wheel Nut Indicator is manufactured from Polyurethane. This special grade is suitable for heavy-duty applications such
as high load urban duty cycle service or where full axle loading is
Loose Wheel Nut Indicator is designed to distort and melt at a vehicle hub/stud temperature
of 150 degrees centigrade.
The material used is a virgin polymer and is UV stabilized. It is
therefore dimensionally stable. The
polymer does not degrade in sunlight. Loose Wheel Nut Indicator can
be cleaned using any of the available vehicle cleaning agents,
detergent solutions or paraffin.
Loose Wheel Nut Indicator is not attacked by road salts or petrochemicals. The pointer being
large, it is
highly visible even when coated with road or operational grime.
Loose Wheel Nut Indicator is available in an extensive range of sizes and colours, our
current size and colours are as below:
|Universal loose wheel nut indicator size|
|Model No.||Material & colour||Fitting nut size (mm)|
|Standard loose wheel nut indicator size|
|For cap style indicator and wheel nut retainer,pls contact with us
for more details.|
Other colors/size are available for custom orders.
The size refers to the 'across the flats'
dimension of the wheel nut hexagon in
A simple and accurate means of measuring the
wheel nut size is to use an un-worn socket as it is
important that the correct size of Loose Wheel
Nut Indicator is fitted to the wheel nut.
They should be a tight slide fit down to the washer of the wheel
nut or wheel hub face leaving a small nominal (say 0.5 mm) air gap
between the two surfaces.
How to Fit it:
It is recommended that the initial fitting out of the vehicle is
done in the course of scheduled
maintenance or during a roadworthiness inspection or when a wheel
nut torque check is scheduled.
***The wheel nuts must be torqued to the recommended value before
the Loose Wheel Nut Indicators are fitted.
The Loose Wheel Nut Indicator should be a tight slide fit onto the
wheel nut without the need for tools or
any other assistance. This is also the case when there is a need to
Fit the Wheel-check collar so that the raised rim of the collar is outermost from the wheel
nut washer, or the profile of the wheel. This eases removal by
giving a finger purchase on the collar rim of the Loose Wheel Nut Indicator without damage.
••• 3 Steps to Install Loose Wheel Nut Indicator•••
1. Torque wheel nuts to proper specifications (recommended ft/lb).
2. Ensure correct size by measuring unit from flat to flat
3. Place one Loose Wheel Nut Indicator over each nut with the
raised collar resting against the wheel. Push with both thumbs or a
socket flush to the wheel (see below picture).
For more information about PE wheel nut indicator, PU loose wheel
nut indicator, dustite wheel nut indicator, wheel nut retainer, Pls
contact us by email:
Hot line: 86-769-83066965 ; 86-13428629166
OEM orders are accepted.